This 2024 Sennebogen 825M E-Series with K14 boom configuration is practically a brand-new machine — with just 10 hours on the clock & comes w/ a 12 month / 3,000hr warranty — equipped with a 15 kW Baldor generator magnet system with Hubbell controller included in the machine price and ready to work from day one. This is as close to new as the used market gets, with full service life ahead and immediate availability at a used equipment price.  It went through production in 2024, but hasn’t been put into Service.  The hours are from post-production QC and Transport. 

The K14 configuration delivers 46.8′ of total reach via an 8.5m compact boom and 5.8m grab stick, giving operators the range to work large material piles, load trucks efficiently, and maintain steady production throughput across scrap yard and recycling operations. An additional 1.1t counterweight provides added stability for demanding material handling cycles.

Powered by a Cummins B6.7 engine producing 173 HP (129 kW) at 2,200 RPM with Tier 4 Final emissions compliance, automatic idle-stop control, and Eco-mode, the 825M delivers reliable, fuel-efficient performance through demanding production shifts. The computer-free, load-sensing hydraulic system with flow-on-demand control keeps response crisp and fuel consumption controlled throughout the day.

The maXCab E270 elevates hydraulically to 8’8″, giving operators excellent sightlines over material piles with front and top cab protection guards, automatic climate control, SENCON diagnostics, a camera system, LED light package, and cab-mounted strobe light — a workstation built for safe, sustained, productive shifts.

The rubber-tired MP26E undercarriage with 4-point outrigger stabilizers, all-wheel drive, joystick steering, and solid rubber tires 10.00-20 provides the mobility and stability needed for high-cycle scrap and recycling work, with fast repositioning across large yard footprints without requiring a lowboy.

Sennebogen backs every 825M with $65 million in parts inventory in Stanley, NC, 24/7 on-call parts service, and factory-direct technical support — keeping machines running efficiently with minimal downtime.

Original Factory Specifications

Engine
Cummins B6.7 diesel engine (6 cylinder) with direct injection, water cooled (TIER 4f emission)
Engine output 173 HP (129 kW) @ 2,200 rpm
Turbo intercooler direct driven
Water cooler hydraulically driven, reversible
Automatic idle-stop control and eco-mode for diesel engine

Hydraulic System
Computer free, state-of-the-art load-sensing with flow-on-demand control
Hydraulic cooler hydraulically driven, reversible
Hydro-Clean filtration system with water absorption and contamination indicator

Upper Carriage & Swing System
Torsion free, precisely machined upper carriage frame
High torque axial piston swing motor
Large dimensioned, external teeth swing bearing with removable protection cover
Automatic central lubrication system for upper carriage and swing bearing
Handrail on top of upper carriage
Fire extinguisher set (1x cab, 1x storage compartment) – brackets installed
Light Package consisting of: 2x halogen in cab roof, 2x in frame
Additional counterweight 1.1t

Operator’s Cab “maXCab” Industry
Hydraulic elevating cab system (elevation: 8’8”)
Catwalk with handrail beside cab (Installed on site)
maXCab with sliding door and door window as sliding window, sunshade, floor mat
Front & top cab protection guards (installed prior to shipping)
Automatic climate control with AC, heater and defroster
AM/FM radio with MP3/Bluetooth
SENCON visual and acoustic diagnostic system for monitoring all essential machine functions
Air suspended and adjustable operator’s seat incl. armrests, seat heater, headrest, seat belt
Camera system with display in cab
LED light package on cab, rear
Strobe light mounted on cab

Working Equipment
K14 – reach 46′ / purpose-built material handling working equipment
Straight boom, with end stop monitoring system and limit switches
Straight stick, with end stop monitoring system and limit switches
Boom & Stick cylinders equipped with safety check valves and end position dumping
Light Package consisting of: 1x at boom, 2x at stick
Attachment open/close and rotate hydraulic circuits and lines installed up to the end of the stick (ball valves)

Under Carriage
Rubber tired under carriage MP26E with 4-point outriggers
Automatic unlock of oscillating axle if upper carriage in longitudinal direction to under carriage
Solid rubber tires 10.00-20 (8 units) inclusive intermediate protection ring
Steering via joystick, front wheel steering
All wheel drive via variable hydraulic motor with 2-stage shift transmission
Protection guard for under carriage (installed prior to shipping)
2-circuit servo brake system with additional safety brake
Centralized lubrication points (front & rear) for lubrication of under carriage components
Audible travel alarm while driving machine (forward & backward)
Toolbox w/ basic tools located in under carriage toolbox

Magnet System
15kW generator
Plug in front of stick to hook up magnet, magnet connection cable in under carriage toolbox
Magnet suspension link (included in machine price)