SENNEBOGEN
- Used
- 2023
- 1210
- 57,000 Lbs
- K12 ULM 41'
- CUMMINS Engine B6.7, 129 kW / 2,200, Tier 4 Final
- 825.0.3995
- maXCab
- Request a Price
DESCRIPTION
This 2023 Sennebogen 825M K12 ULM material handler is a low-hour, high-performance solution built for waste & biomass recycling, log yards, and bulk material applications. With only 1,210 original hours, this machine offers near-new condition with significant cost savings over new.
Key Highlights:
1,210 original hours
K12 ULM boom/stick configuration
Excellent lift capacity and stability
Fuel-efficient diesel engine
Ideal for biomass, and waste handling
If you’re looking for a late-model, low-hour 825M that delivers productivity, visibility, and reliability, this unit is job-site ready.
Contact us today for pricing and availability.
DETAILED SPECS
Original Factory Specs
Engine
Cummins B6.7 diesel engine (6 cylinder) with direct injection, water cooled (TIER 4f emission)
Engine output 173 HP (129 kW) @ 2,200 rpm
Turbo intercooler direct driven
Water cooler hydraulically driven, reversible
Automatic idle-stop control and eco-mode for diesel engine
Hydraulic System
Computer free, state-of-the-art load-sensing with flow-on-demand control
Standard lubricants (w/o hydraulic oil) for diesel machines
Hydraulic oil Shell Tellus S2 VA 46
Hydraulic cooler hydraulically driven, reversible
Hydro-Clean filtration system with water absorption and contamination indicator
Upper Carriage & Swing System
Additional counterweight 1.1t
Torsion free, precisely machined upper carriage frame
High torque axial piston swing motor
Large dimensioned, external teeth swing bearing with removable protection cover
Automatic central lubrication system for upper carriage and swing bearing
Handrail on top of upper carriage (installed on site)
Fire extinguisher set (1x cab, 1x storage compartment) – brackets installed
2 LED headlights mounted on the sides of the upper-carriage: 1 pc on left side, 1 pc on right side
1 LED flashing light at rear of machine
Operator’s Cab “maXCab”
Hydraulic elevating cab system “E270″ (elevation: 8’8”)
Catwalk with handrail beside cab (installed on site)
maXCab with sliding door and door window as sliding window, sunshade, floor mat
Windscreen wiper for skylight with washer system
Windscreen wiper for lower cabin front window with washer system only for MAXCAB operator’s cab
Sun protection for skylight, inside, only for MAXCAB
Sun protection for front windscreen, inside, only for MAXCAB
Cab front windscreen in bullet proof glass version for MAXCAB
Skylight protection guard (installed prior to shipment)
Front windshield protection guard (installed prior to shipment)
Automatic climate control with AC, heater and defroster
AM/FM radio with MP3/Bluetooth
SENCON visual and acoustic diagnostic system for monitoring all essential machine functions
SENtrack telematics system including data connection – Standard SIM
Air suspended and adjustable operator’s seat incl. armrests, seat heater, headrest, seat belt
2-inch seat belt
Camera system with display in cab
LED light package on cab, rear
Working Equipment
K12 ULM materials handling boom – 6.8m + 5.5m
Quick change couplers (bolted type) with counter pieces
Hoist limit switch for grab stick – function stick out
Hoist limit switch for loading boom – function hoist up
(3) ULM hydraulics incl. Tool Control
2 LED headlights mounted on the stick: 1 pc on left side, 1 pc on right side
Attachment open/close and rotate hydraulic circuits installed up to the end of the stick (installed prior to shipping)
Under Carriage
Rubber tired under carriage MP26E with 4-point outriggers
Automatic unlock of oscillating axle if upper carriage in longitudinal direction to under carriage
Solid rubber tires 10.00-20 (8 units) inclusive intermediate protection ring
Steering via joystick, front wheel steering
All wheel drive via variable hydraulic motor with 2-stage shift transmission
Protection guard for under carriage to protect transmission (installed prior to shipment)
2-circuit servo brake system with additional safety brake
Centralized lubrication points (front & rear) for lubrication of under carriage components
Audible travel alarm while driving machine (forward & backward)
Toolbox w/ basic tools, stick pin, grease gun, wheel chock, green & gray touch up paint located in under carriage toolbox
Magnet System – N/A
AFTER-SALES SUPPORT
All of our Used machines receive the same level of after-sell support as our new machines.
Customer Direct
We work directly with you when it comes to selling our machines and providing after-sell support. No other manufacturer gives you direct access
Minimize Downtime
Uptime is priority No. 1 at SENNEBOGEN and we have developed specialized programs and services to keep you up & running smoothly.
SERVICE NETWORK
SENNEBOGEN has built the industry’s largest network for factory-trained technicians, offering you more choices to ensure the best possible support for your SENNEBOGEN, throughout the life of the machine.
Uptime Kits
SENNEBOGEN is the only manufacturer on the market that has specific kits to provide quick resolution for minor issues that can cause a machine to go down
Preventive Maintenance Kits
Parts Inventory
We have $50M in parts inventory in Stanley, NC with a 95% order fill-rate. When we run into a situation where we do not have a part in-stock we will air-freight it from Germany.
24-Hour “on call” parts service
We have a 24-hour “on call” parts service which you can call if a machine is down, and you need a part asap. Our “on call” parts rep will arrange for a hotshot truck to arrive at our warehouse and ensure the part is in route asap. (Call parts @ 704-347-4911).
