SENNEBOGEN 830 E Material Handler Uses Electric Drive & Power Pack

830 Electric with power pack

830 M Electric is equipped with a Power Pack

Stanley, NC – SENNEBOGEN continues to be the technology leader in the development of electrically powered material handlers. The firm’s eGreen machines have been proven to reduce operating costs by up to 50%, when compared to the same machines powered by diesel. Available from the factory on any SENNEBOGEN purpose-built material handler, the eGreen electric drive has been widely adopted in applications from scrap recycling to barge loading.

Power-packed at Bauma!
Historically, choosing electric power has required a trade-off in mobility. Most electric drive machines are installed in a fixed location, hardwired into their power supply, or they are attached to a tether cable that allows a limited range of travel. At the 2019 Bauma Exhibition, SENNEBOGEN demonstrated how today’s eGreen machines can be set free to move about the jobsite. 

The SENNEBOGEN 830 E Series displayed at Bauma relies primarily on its 225 HP (160 kW) electric motor, with power supplied through a large cable connection at the rear of the machine. A cable reel mounted on the machine gives the first hint that this machine has something different. Installed, the 830’s counterweight, is an integrated power pack that allows the machine to generate its own power when its capabilities are needed in more distant work zones. The result is maximum flexibility, combining the savings and simplicity of eGreen with the mobility of traditional diesel systems.

Economical and emissions-free
The advantages of an electric drive extend far beyond simple fuel costs. Lower wear enables much longer service intervals and less downtime than diesel engines. Oil and filter changes are eliminated and the cost of other service parts is also reduced. Electrically driven machines are always ready to work and, if necessary, can run around the clock without refueling. Finally, SENNEBOGEN electric material handlers aren’t just cost-effective, they are exceptionally environmentally friendly and give off no emissions. The electrohydraulic drive systems make work much more comfortable for the operator, too, thanks to being vibration-free.

Ready to roll
Adding a power pack to the 830 means that, when the application requires the machine to move to another location in the customer’s facility, the operator can simply disconnect and go. As soon as the machine is required to leave its stationary power supply, all the operator has to do is remove the large plug, roll up the power cable onto the built-in reel, then start up the diesel power pack in the counterweight. With a quick switch, the motor begins to draw from the diesel power pack instead of the electrical mains and the machine is ready to roll.

Cost-efficient and comfortable
Even when it’s running off the power pack, the 830 remains remarkably cost-efficient to operate. Diesel-powered SENNEBOGEN material handlers are widely acclaimed for their low fuel costs and low emissions, thanks to a wide range of “Green Efficiency” features designed into all E Series models. The machine’s elevating Maxcab operator station is also designed to maximize productivity. The latest version of the Maxcab is longer than previous models, providing more space for the operator to work comfortably and a wider opening for its sliding door, for even easier access to and from the cab.

The power pack supplies the electric motor with the energy to support all of the machine’s work functions, anywhere it needs to go, without worrying about the limited length of the power cable.  Thanks to the integration of the power pack within the counterweight, the 830 E remains exceptionally maneuverable and compact and makes the most of its strengths as a full-fledged, emission-free material handling machine. The power pack configuration is also offered on a line-up of SENNEBOGEN material handlers ranging from the 818 to the 840 models.

About SENNEBOGEN

SENNEBOGEN has been a leading name in the global material handling industry for over 65 years. Based in Stanley, North Carolina, within the greater Charlotte region, SENNEBOGEN LLC offers a complete range of purpose-built machines to suit virtually any material handling application. Established in America in the year 2000, SENNEBOGEN LLC has quickly become a leading provider of specialized equipment solutions for recycling and scrap metal yards, demolition, barge and port operations, log-handling, transfer stations and waste facilities from coast to coast. A growing network of distributors supports SENNEBOGEN LLC sales and service across the Americas, ensuring the highest standard of professional machine support and parts availability.

For more information on the full line of SENNEBOGEN green line material handlers, contact:

Constantino Lannes, President
SENNEBOGEN LLC
1957 Sennebogen Trail (formerly 7669 Old Plank Road)
Stanley, NC 28164
Tel: (704) 347-4910 or fax (704) 347-8894
E-mail: sales@sennebogenllc.com
Visit the web site at www.sennebogen-na.com

AEDAEMAIST CARI IRPTISRINDA Tree Care Association Industry NSA FRA