Protected by reCAPTCHA

Privacy - Terms

Privacy - Terms

Protected by reCAPTCHA

Privacy - Terms

SENNEBOGEN 870 Meets All Challenges At Busy Port

Versatile use of the 870 hybrid with the quick coupler on the stick is enhanced by the economical operation of SENNEBOGEN’s Green Hybrid System.

Versatile use of the 870 hybrid with the quick coupler on the stick is enhanced by the economical operation of SENNEBOGEN’s Green Hybrid System.

Bendorf, Germany – With already 6,000 operating hours under its belt, the SENNEBOGEN  870 R-HD hybrid material handler has already made a name for itself in the inland Port of Bendorf.

The hybrid crawler has been an integral part of the dock operations since 2017 for Bendorfer Umschlag- und Speditionsgesellschaft (BUS Bendorf). The region on the banks of the Rhine where BUS Bendord operates is known for its local clay producers and BUS Bendorf helps these companies transport goods from Bendorf to the rest of the world. The 870 is not only extremely efficient and flexible thanks to its reduced energy consumption as well as for the numerous attachments it uses to meet the daily requirements of successful inland port operation. 

All in a day’s work
Anything can be transported by BUS Bendorf…bulk goods, general cargo, timber. A lot is asked of the 870 and it’s up to the task. It navigates two docks that total a length of almost 10 football fields (2,952 ft) with over 700,000 sq. ft. (65,000 m2) of storage facilities. This is why stevedoring companies across the continent are relying more on material handlers like the SENNEBOGEN 870 hybrid to replace cranes on the dock. According to the operators, there are many advantages of a material handler over a crane:

  1. The SENNEBOGEN 870 Hybrid with 80 ft (25 m) equipment for loading ships even at low tide. The stability is provided by the balanced and wide crawler undercarriage.

    The SENNEBOGEN 870 Hybrid with 80 ft (25 m) equipment for loading ships even at low tide. The stability is provided by the balanced and wide crawler undercarriage.

    The volume of cargo handled in inland ports has risen steadily in recent years and more goods are being transported by water.
  2. It can be challenging and costly to purchase spare parts for older crane models.
  3. Depending on the type of material, a material handler’s cycle time can be up to two times faster than a crane.

What makes it all possible are the quick couplers and SENNEBOGEN’s plug-and-play principle allowing operators to easily adapt to a new material handling situation in no time. It’s not uncommon for the BUS Bendorf port specialists to see a variety of ships at the company’s 1,000 ft. (300 m) dock every day. Some will have to be loaded with clay but also various other bulk and general cargo such as excavated soil, wood, or big bulk bags. Every year, the company estimates that their SENNEBOGEN handles over 300,000 t!

Sophisticated machine design: Not only a special visual configuration

In terms of mobility, the SENNEBOGEN 870 hybrid outperforms its crane predecessor in every way possible.

Previously, BUS Bendorf’s harbor crane was mounted on a movable rail gantry that allowed it to serve ships along the entire length of the 984 ft. (300 m) long dock. However, it was also limited to this singular travel path. The company’s operations on the second dock is 1,640 ft. (500 m) away and was totally inaccessible by the crane.

SENNEBOGEN’s spacious Mastercab, allows the operator to enjoy perfect all-round visibility for precise loading of various bulk materials, general cargo or timber.

SENNEBOGEN’s spacious Mastercab, allows the operator to enjoy perfect all-round visibility for precise loading of various bulk materials, general cargo or timber.

Since the travel routes were limited to a maximum clearance height of 16.4 ft (5 m), a sophisticated solution was needed and that’s where the collaboration between began. Working together, they were able to reduce the height of the boom in the transport position to 15.75 ft (4.8 m) by implementing special kinematics without sacrificing reach and power. From afar and up close, although not in the traditional SENNEBOGEN green, the material handler stands out on the banks of the Rhine. The 870’s upper carriage is in bright yellow while the boom shines in BUS Bendorf’s blue.

SENNEBOGEN’s 80 ft. (25 m) long port equipment offers even more reach, depth, and flexibility for port operations. In front of the dock wall in Bendorf is a sloping embankment and during low tide ships may have to berth 30-40 ft (10-12 m) away from the wall to be loaded. With a wide and secure undercarriage, the material handler is always securely positioned on the dock, even at full outreach and with large loads in the grab. Even with all that, the decisive feature that they like best is SENNEBOGEN’s Green Hybrid System. Managing Director Markus Stock explains, “Thanks to the energy re-capture system, fuel consumption is significantly reduced. I personally appreciate that the machine is very reliable with maximum uptime.”

SENNEBOGEN’s responsive joystick allows for precision control and nimble placing of materials

SENNEBOGEN’s responsive joystick allows for precision control and nimble placing of materials.

The right tools make all the difference
Operator Maik Hannöver had an inkling of his profession early on in life. “I sat on heavy machinery for the first time when I was just 3 years old, because my father used to work in a quarry. So, I’d like to say that I’ve been in almost every kind of excavator – but I’ve never driven a better machine than the SENNEBOGEN 870 hybrid.” He spends many hours in the ergonomically designed seat of the SENNEBOGEN Mastercab and adds, “It’s a very comfortable place for me to work in!”

About SENNEBOGEN

SENNEBOGEN has been a leading name in the global material handling industry for over 65 years. Based in Stanley, North Carolina, within the greater Charlotte region, SENNEBOGEN LLC offers a complete range of purpose-built machines to suit virtually any material handling application. Established in America in the year 2000, SENNEBOGEN LLC has quickly become a leading provider of specialized equipment solutions for recycling and scrap metal yards, demolition, barge and port operations, log-handling, transfer stations, waste facilities and the tree care industry from coast to coast. A growing network of distributors supports SENNEBOGEN LLC sales and service across the Americas, ensuring the highest standard of professional machine support and parts availability.

For more information on the full line of SENNEBOGEN green line material handlers, contact:

SENNEBOGEN LLC
1957 Sennebogen Trail
Stanley, NC 28164
Tel: (704) 347-4910 or fax (704) 347-8894
E-mail: sales@sennebogenllc.com

 

 

AEDAEMAIST CARI IRPTISRINDA Tree Care Association Industry NSA FRA ASME B30.25
member