Multi-Purpose SENNEBOGEN 875 Is Purpose-Built For Broussard Coastal Restoration Projects
With cab in position, the operator has a perfect view of the barge and the pile.
Abbeville, LA – “Mobility” isn’t the first quality that comes to mind when you’re talking about a 300,000 lb. machine, but that’s what attracted Chip Broussard to his new SENNEBOGEN 875 R-HD material handler.
The Broussard family is one of the leading marine and land construction contractors on the Gulf Coast. Coupling oilfield and pipeline projects with marine towing, dock and crane services, Broussard Brothers, Inc. is a big part of the heavy contracting scene in Louisiana’s Intracoastal region. Now their part just got a little bigger!
Competing for rock business
Broussard Brothers was looking for ways to be more competitive in bids for upcoming government contracts for seawall restoration work. With miles of Louisiana coastline requiring thousands of tons of rock to be loaded and placed, these jobs would be a welcome addition to the Broussards’ long-term plans. But, with their largest cable crane handling up to 150 tons-per-hour, the firm was concerned that their current fleet would not measure up against larger equipment in the area.
“We originally saw the 875 at CONEXPO,” says Chip Broussard, a third-generation member and current VP of Finance for the family-owned business. ”We also saw a SENNEBOGEN in a rock yard near here; but we bit the bullet at CONEXPO and decided this is our best bet. We had seen similar machines in the area, but nothing of this size and the other machines have to be welded down to the barge. What intrigued us was that the SENNEBOGEN is on tracks. It doesn’t have to be welded down. At times we might be doing rock work and we want a crane on the ground; then we pick up another job and want to put the SENNEBOGEN on the barge. Because of its versatility, we didn’t have to get another barge!”
Powerful, but flexible
The President of SENNEBOGEN LLC, Constantino Lannes, explained another reason why the green machines are well suited to marine work. “All of our machines are engineered on a square footprint. The slewing ring is centred on the undercarriage and its load ratings are equal through 360o of swing. That kind or balance is a valuable safety factor on land or on water. And it also gives the operator more flexibility to load and swing in any direction.”
Flexibility is high on Broussard’s list of qualities that the 875 brings to his fleet. “We can better utilize our different assets according to the application we’re on. We just swap the equipment to get the right piece in the right place.” He notes that his 875 also came with a quick change coupler that lets him easily attach a lifting hook, clamshell bucket or rock grapple.
Sometimes a grapple, sometimes a rock grapple, sometimes a bucket. No problem with a quick change coupler.
More tons per hour
“It’s very adaptable to our wide range of operations,” he continues. “Some of these rock jobs, the stones are very large, more than the clamshell can handle, so we have the grapple for that. We have also done some dredging with it, some maintenance work.” This was where the 875 first showed off its real capacity for production. “We were loading some material barges, one that can hold up to 350 tons. We loaded it in about 20 minutes!”
Broussard admits that his first dredging project let the 875 shine in optimal conditions. In that situation, with short, easy swing cycles, he estimates that the 875 could move as much as 600 tons per hour. But in a more realistic application, such as shoreline restoration work that requires precise placement of man-sized boulders, Broussard is quite confident that the machine can maintain his target of 400 to 500 tons per hour. “We just increased our capacity by a factor of three or four times!”
Moving more, with less
As Broussard gets the 875 out into more commercial projects, he looks forward to bonus profits that the machine will earn with its exceptional fuel efficiency. The giant material handler features
SENNEBOGEN’s “Green Hybrid” energy recapture system. An oversize hydraulic cylinder is mounted between the boom’s two lifting cylinders. This cylinder is used to compress gas on each downstroke of the boom. On the upstroke, the captured energy is released, like a compressed spring, to assist in lifting the boom and the load. The simple, mechanical system reduces fuel consumption by as much as 50%!
“I’m anticipating that we’ll run on 8 to 10 gallons of diesel per hour: about the same gph as a large excavator or our cable crane. That’s great, but if you compare gallons per ton of material moved, it’s very impressive. We usually bid so many gallons of fuel to do the project; now our fuel cost will be cut in half, or even less.”
Ready to compete
With the 875’s efficient throughput and low operating costs, Broussard feels ready to take on the competitive coastal restoration market. “There’s a lot of people chasing this business, as other sectors have slowed down,” he says. “They’re also investing in new equipment, new excavators, but I don’t know that they’re going to get the efficiency or the gallons of fuel saving that we get, and will not have the size of the 875. Besides, an excavator is not built for this kind of work. You have to add a counterweight to it, and then make other modifications. But this 875 is purpose-built for the kind of material handling we do here.”
About SENNEBOGEN
SENNEBOGEN has been a leading name in the global material handling industry for over 65 years. Based in Stanley, North Carolina, within the greater Charlotte region, SENNEBOGEN LLC offers a complete range of purpose-built machines to suit virtually any material handling application. Established in America in the year 2000, SENNEBOGEN LLC has quickly become a leading provider of specialized equipment solutions for recycling and scrap metal yards, demolition, barge and port operations, log-handling, transfer stations, waste facilities and the tree care industry from coast to coast. A growing network of distributors supports SENNEBOGEN LLC sales and service across the Americas, ensuring the highest standard of professional machine support and parts availability.
For more information on the full line of SENNEBOGEN green line material handlers, contact:
SENNEBOGEN LLC
1957 Sennebogen Trail
Stanley, NC 28164
Tel: (704) 347-4910 or fax (704) 347-8894
E-mail: sales@sennebogenllc.com
