This 2024 Sennebogen 835M E-Series with K18 boom configuration is a nearly new wheeled material handler with only 708 hours — offering current-generation performance and remainder of 2,000hrs / 12-month Hydraulic & Structural warranty at a used equipment price. It comes equipped with a 25 kW Sennebogen generator magnet system included in the machine price, ready to work from day one.

The K18 configuration delivers 57’8″ of total reach via a 33’2″ straight boom and 25’11” straight stick, with lift capacity up to approximately 42,990 lbs at close range — giving operators the range and power to work large material piles, feed shredders and shears, and maintain high-cycle production throughput across expansive scrap yard and recycling operations.

Powered by a Cummins L9 engine producing 310 HP (231 kW) at 2,000 RPM with Tier 4 Final emissions compliance, automatic idle-stop control, and Eco-mode, the 835M delivers the sustained power output required for demanding production shifts. The computer-free, load-sensing hydraulic system with flow-on-demand control keeps response crisp and fuel consumption controlled throughout the day.

The maXCab Industrial E270 elevates hydraulically to 8’8″, giving operators excellent sightlines over material piles with front and top cab protection guards, automatic climate control, SENCON diagnostics, a dual camera system, LED light package, and cab-mounted strobe light — a workstation built for safe, sustained, productive shifts.

The rubber-tired MP41E undercarriage with 4-point outrigger stabilizers, all-wheel drive, joystick steering, and solid rubber tires 12.00-24 provides the mobility and stability needed for high-cycle scrap and recycling work, with fast repositioning across large yard footprints without requiring a lowboy.

Sennebogen backs every 835M with $70 million in parts inventory in Stanley, NC, 24/7 on-call parts service, and factory-direct technical support — keeping machines running efficiently with minimal downtime.

Original Factory Specs

Engine
Cummins L9 diesel with direct injection, water cooled (TIER 4f emission)
Engine output 310 HP (231 kW) @ 2,000 rpm
Turbo intercooler direct driven
Water cooler hydraulically driven, reversible
Automatic idle-stop control and eco-mode for diesel engine

Hydraulic System
Computer free, state-of-the-art load-sensing with flow-on-demand control
Hydraulic cooler hydraulically driven reversible
Hydro-Clean filtration system with water absorption and contamination indicator

Upper Carriage & Swing System
Torsion free, precisely machined upper carriage frame
High torque axial piston swing motor
Large dimensioned, external teeth swing bearing with removable protection cover
Automatic central lubrication system for upper carriage
Manual pinion lubrication system for swing bearing
Handrail on top of upper carriage
Fire extinguisher set (1x cab, 1x storage compartment) – brackets installed, extinguisher shipped separate to dealer
Light Package consisting of: 2x halogen in cab roof, 2x in frame

Operator’s Cab “maXCab” Industrial
Hydraulic elevating cab system “E270″ (elevation: 8’8”)
Catwalk with handrail beside cab
maXCab Industrial with sliding door and door window as sliding window, sunshade, floor mat
Front & top cab protection guard
Automatic climate control with AC, heater and defroster
AM/FM radio with MP3/Bluetooth
SENCON visual and acoustic diagnostic system for monitoring all essential machine functions
Air suspended and adjustable operator’s seat incl. armrests, seat heater, headrest, seat belt
Camera system with display in cab (1x to rear, 1x to right side)
LED light package on cab, rear
Strobe light mounted on cab
Operator’s & Maintenance manual incl. hydraulic & electric schematics
Spare Parts catalogue

Working Equipment
K18 – reach 57’8″
Straight material handling boom with end stop monitoring system and limit switches
Straight material handling stick with end stop monitoring system and limit switches
Boom & Stick cylinders equipped with safety check valves and end position dumping
Light Package consisting of: 1x at boom, 2x at stick
Attachment open/close and rotate hydraulic circuits and lines installed up to the end of the stick (ball valves)

Under Carriage
Rubber tired under carriage MP41E with 4-point outriggers
Automatic unlock of oscillating axle if upper carriage in longitudinal direction to under carriage
Solid rubber tires 12.00-24 (8 units) inclusive intermediate protection ring
Steering via joy stick, front wheel steering
All wheel drive via variable hydraulic motor with 2-stage shift gear
Protection guard for under carriage to protect gear box, hydraulic motor and drive shafts
2-circuit servo brake system with additional safety brake
Centralized lubrication points (front & rear) for lubrication of under carriage components
Tool box w/ basic tools, stick pin, grease gun, green & gray touch up paint located in under carriage toolbox

Magnet System
25kW Sennebogen generator
Plug in front of stick to hook up magnet, magnet connection cable in under carriage toolbox
Magnet suspension link