SENNEBOGEN
821 M K11 E-Series
821 M K11 E-Series
- Used
- 6980
- 52800 lbs
- K11 - 36'
- CUMMINS Engine QSB 4.5 - C140, 104kW/2200 rpm, Tier 4 Final
- 821.0.2465
- Eye level up to 18'
- Request a Price
DESCRIPTION
Original Factory Specifications
Engine
- Cummins B4.5 diesel engine (4 cylinder) with direct injection, water cooled (TIER 4f emission)
- Engine output 165 HP (123 kW) @ 2,200 rpm
- Turbo Intercooler & water cooler hydraulically driven, reversible
- Automatic idle-stop control and eco-mode for diesel engine
Hydraulic System
- Computer free, state-of-the-art load-sensing with flow-on-demand control
- Hydraulic cooler hydraulically driven, reversible
- Hydro-Clean filtration system with water absorption and contamination indicator
Upper Carriage & Swing System
- Torsion free, precisely machined upper carriage frame
- Upper rails (installed prior to shipping)
- High torque axial piston swing motor
- Large dimensioned, internal teeth swing bearing
- Automatic central lubrication system for upper carriage and swing bearing
- Fire extinguisher set
- Light Package consisting of: 2x halogen in cab roof, 2x in frame
Operator’s Cab “maXCab”
- Hydraulic elevating cab system “E270″ (elevation: 8’8”)
- maXCab with sliding door and door window as sliding window, sunshade, floor mat
- Front & Top window guards (installed prior to shipping)
- Cab Catwalk (installed on site)
- Automatic climate control with AC, heater and defroster
- AM/FM radio with MP3/Bluetooth
- SENCON visual and acoustic diagnostic system for monitoring all essential machine functions
- Air suspended and adjustable operator’s seat incl. armrests, seat heater, headrest, seat belt
- Camera system with display in cab
- LED light package on cab, rear
- Strobe light mounted on cab
- Operator’s & Maintenance manual incl. hydraulic & electric schematics
- Spare Parts catalogue
Working Equipment
- K11 – reach 36′ / purpose-built material handling working equipment
- Straight material handling boom, with end stop monitoring system and limit switches
- Straight material handling stick, with end stop monitoring system and limit switches
- Boom & Stick cylinders equipped with safety check valves and end position dumping
- Light Package consisting of: 1x at boom, 2x at stick
- Attachment open/close and rotate hydraulic circuits and lines installed up to the end of the stick (ball valves)
Under Carriage
- Rubber tired under carriage MP21E with 4-point outriggers
- Automatic unlock of oscillating axle if upper carriage in longitudinal direction to under carriage
- Solid rubber tires 10.00-20 (8 units) inclusive intermediate protection ring
- All wheel drive via variable hydraulic motor with 2-stage shift transmission
- Undercarriage protection (installed prior to shipping)
- 2-circuit servo brake system with additional safety brake
- Centralized lubrication points (front & rear) for lubrication of under carriage components
- Audible travel alarm while driving machine (forward & backward)
- Toolbox w/ basic tools
DETAILED SPECS
Original Factory Specifications
Engine
- Cummins B4.5 diesel engine (4 cylinder) with direct injection, water cooled (TIER 4f emission)
- Engine output 165 HP (123 kW) @ 2,200 rpm
- Turbo Intercooler & water cooler hydraulically driven, reversible
- Automatic idle-stop control and eco-mode for diesel engine
Hydraulic System
- Computer free, state-of-the-art load-sensing with flow-on-demand control
- Hydraulic cooler hydraulically driven, reversible
- Hydro-Clean filtration system with water absorption and contamination indicator
Upper Carriage & Swing System
- Torsion free, precisely machined upper carriage frame
- Upper rails (installed prior to shipping)
- High torque axial piston swing motor
- Large dimensioned, internal teeth swing bearing
- Automatic central lubrication system for upper carriage and swing bearing
- Fire extinguisher set
- Light Package consisting of: 2x halogen in cab roof, 2x in frame
Operator’s Cab “maXCab”
- Hydraulic elevating cab system “E270″ (elevation: 8’8”)
- maXCab with sliding door and door window as sliding window, sunshade, floor mat
- Front & Top window guards (installed prior to shipping)
- Cab Catwalk (installed on site)
- Automatic climate control with AC, heater and defroster
- AM/FM radio with MP3/Bluetooth
- SENCON visual and acoustic diagnostic system for monitoring all essential machine functions
- Air suspended and adjustable operator’s seat incl. armrests, seat heater, headrest, seat belt
- Camera system with display in cab
- LED light package on cab, rear
- Strobe light mounted on cab
- Operator’s & Maintenance manual incl. hydraulic & electric schematics
- Spare Parts catalogue
Working Equipment
- K11 – reach 36′ / purpose-built material handling working equipment
- Straight material handling boom, with end stop monitoring system and limit switches
- Straight material handling stick, with end stop monitoring system and limit switches
- Boom & Stick cylinders equipped with safety check valves and end position dumping
- Light Package consisting of: 1x at boom, 2x at stick
- Attachment open/close and rotate hydraulic circuits and lines installed up to the end of the stick (ball valves)
Under Carriage
- Rubber tired under carriage MP21E with 4-point outriggers
- Automatic unlock of oscillating axle if upper carriage in longitudinal direction to under carriage
- Solid rubber tires 10.00-20 (8 units) inclusive intermediate protection ring
- All wheel drive via variable hydraulic motor with 2-stage shift transmission
- Undercarriage protection (installed prior to shipping)
- 2-circuit servo brake system with additional safety brake
- Centralized lubrication points (front & rear) for lubrication of under carriage components
- Audible travel alarm while driving machine (forward & backward)
- Toolbox w/ basic tools
Magnet System (installed prior to shipping)
- 15kW Baldor Hubble
- Plug in front of stick to hook up magnet, magnet connection cable in under carriage tool box
AFTER-SALES SUPPORT
All of our Used machines receive the same level of after-sell support as our new machines.
Customer Direct
We work directly with you when it comes to selling our machines and providing after-sell support. No other manufacturer gives you direct access
Minimize Downtime
Uptime is priority No. 1 at SENNEBOGEN and we have developed specialized programs and services to keep you up & running smoothly.
SERVICE NETWORK
SENNEBOGEN has built the industry’s largest network for factory-trained technicians, offering you more choices to ensure the best possible support for your SENNEBOGEN, throughout the life of the machine.
Uptime Kits
SENNEBOGEN is the only manufacturer on the market that has specific kits to provide quick resolution for minor issues that can cause a machine to go down
Preventive Maintenance Kits
Sennebogen has created an easy way to perform PM services on your machines. Our PM kits have all the required parts needed in one simple box with part numbers listed. (Only excludes oils)
Parts Inventory
We have $50M in parts inventory in Stanley, NC with a 95% order fill-rate. When we run into a situation where we do not have a part in-stock we will air-freight it from Germany.
24-Hour “on call” parts service
We have a 24-hour “on call” parts service which you can call if a machine is down, and you need a part asap. Our “on call” parts rep will arrange for a hotshot truck to arrive at our warehouse and ensure the part is in route asap. (Call parts @ 704-347-4911).
Sennebogen Training
We offer you the same Factory Training as our ASPs and Dealers. The Training is free, you just pay airfare, food, & hotel. We are the only manufacturer of material handlers that offers the same level of training we offer our ASPs & Dealers.